SHIPMENT AND STORAGE शिपमेंट और भंडारण

SHIPMENT AND STORAGE शिपमेंट और भंडारण

This manual highlights instructions for erection, operation and maintenance for coal handling and storage system for Coal Based Thermal Power Plant, Coal handling plant. 

यह मैनुअल कोयला आधारित थर्मल पावर प्लांट, कोल हैंडलिंग प्लांट के लिए कोयला हैंडलिंग और भंडारण प्रणाली के निर्माण, संचालन और रखरखाव के निर्देशों पर प्रकाश डालता है।

The conceptual design for installation of the plant has been engineered in accordance with specification outlined by Purchaser/Consultant. In addition most sincere efforts have been made to render maximum amount of perfection not only to the system but also to all other utilities and services in line with the prevailing engineering practices.

संयंत्र की स्थापना के लिए वैचारिक डिजाइन क्रेता / सलाहकार द्वारा उल्लिखित विनिर्देश के अनुसार इंजीनियर किया गया है। इसके अलावा, अधिकांश ईमानदार प्रयास किए गए हैं कि न केवल सिस्टम के लिए, बल्कि प्रचलित इंजीनियरिंग प्रथाओं के अनुरूप सभी अन्य उपयोगिताओं और सेवाओं के लिए अधिकतम मात्रा में पूर्णता प्रदान की जाए।

SHIPMENT AND STORAGE शिपमेंट और स्टोरेज


Whatever be the mode of the shipment, it is strongly recommended that the equipment like pulleys, idlers, gearboxes, couplings and other components should be gently unloaded from the wagons / trucks or trailers.

 जो भी शिपमेंट का मोड हो, यह दृढ़ता से अनुशंसा की जाती है कि उपकरण जैसे कि पुली, इडलर, गियरबॉक्स, कपलिंग और अन्य घटकों को वैगनों / ट्रकों या ट्रेलरों से धीरे से उतारना चाहिए।

In no case these should be equipment's are delivered to the site before the conveyor structures are completely dropped or rough handling of these equipment. It happens on occasions that these erected and therefore some means of storage has to be found out.

किसी भी स्थिति में इन उपकरणों को साइट पर नहीं पहुंचाया जाना चाहिए, इससे पहले कि कन्वेयर संरचना पूरी तरह से गिरा दी जाए या इन उपकरणों को किसी न किसी तरह से संभाल लिया जाए। यह ऐसे अवसरों पर होता है कि इनको खड़ा किया जाता है और इसलिए भंडारण के कुछ साधनों का पता लगाना पड़ता है।

The full protection of a covered building is of course ideal, but sometimes the
equipment having to be kept in open. In such circumstances the following precaution must be taken:

एक कवर इमारत की पूर्ण सुरक्षा निश्चित रूप से आदर्श है, लेकिन कभी-कभी
उपकरण को खुले रखा जाना चाहिए। ऐसी परिस्थितियों में निम्नलिखित सावधानी बरतें
लिया जाना चाहिए:-

Select the storage area where the possibility of water logging is not encountered; low lying area must in no case be used for storage.

भंडारण क्षेत्र का चयन करें जहां पानी लॉगिंग की संभावना का सामना नहीं किया जाता है; कम
झूठ बोलने वाले क्षेत्र को भंडारण के लिए इस्तेमाल नहीं किया जाना चाहिए।



 Store pulleys, idlers etc. on timber sleepers so as to keep them elevated from the
ground and must be covered by tarpaulin.

लकड़ी के स्लीपरों पर पुली, आइडलर इत्यादि स्टोर करें ताकि उन्हें ऊपर से ऊपर रखा जा सके
जमीन और tarpaulin द्वारा कवर किया जाना चाहिए।


 When stored for long time, the bearings fitted with the shaft should be grease packed.The rubber-lagged pulleys and idlers must always be stored under the covered roof and in no case oil or paint should be allowed to accumulate on the rubber surface, as it is liable to deteriorate very fast. 

जब लंबे समय तक संग्रहीत किया जाता है, तो शाफ्ट के साथ फिट किए गए बीयरिंग को पैक किया जाना चाहिए। रबर-लैग्ड पुली और इडलर्स को हमेशा ढंके हुए छत के नीचे संग्रहित किया जाना चाहिए और किसी भी स्थिति में तेल या पेंट को रबड़ की सतह पर जमा नहीं होने देना चाहिए, यह बहुत तेजी से बिगड़ने के लिए उत्तरदायी है।

Vibration in the vicinity of stationary ball or roller bearings especially of gear boxes, pulleys and idlers can cause indentation of the races and as such this condition must be guarded against storing of such rotating components as should be stored away from the area of vibration. vibration. Plummer blocks fitted with the pulleys must be tightly fitted on the foundation.

विशेष रूप से गियर बॉक्स, पुललिस और आइडलर्स के स्थिर गेंद या रोलर बीयरिंग के आसपास के क्षेत्र में कंपन दौड़ के इंडेंटेशन का कारण बन सकता है और इस तरह के रूप में इस तरह के घूर्णन घटकों के भंडारण के खिलाफ संरक्षित किया जाना चाहिए क्योंकि कंपन के क्षेत्र से दूर संग्रहीत किया जाना चाहिए। कंपन। प्लमर के साथ लगे प्लमर ब्लॉक को नींव पर कसकर फिट किया जाना चाहिए।


Your own Dr.Manoj Bhai Rathore
Power Plant specialist and consultant
Self site:-see you again search आप फिर से खोज देखें-mypowerrules.blogspot.com



Comments

Popular posts from this blog

Operation of Coal Handling System कोयला हैंडलिंग सिस्टम का संचालन

COAL HANDLING SYSTEM कोयला हैंडलिंग प्रणाली

belt, Belt conveyors बेल्ट, बेल्ट कन्वेयर